Philips Amplified Phone SE888 User Manual

Quick start guide  
SE888  
 
Get started  
1
Connect the base station and charger  
1
2
3
Connect each end of the power adapter to:  
the DC input jack at the bottom of the base station;  
the power socket on the wall.  
Connect each end of the line cord to:  
the telephone socket at the bottom of the base station;  
the telephone socket on the wall.  
Power  
socket  
Telephone  
socket  
Power  
socket  
Power  
adapter  
Extra handset  
charger  
For multi-handset version, connect each end of the power  
adapter to:  
Telephone  
base station  
the DC input jack at the bottom of the extra handset charger.  
the power socket on the wall.  
Note Charge the batteries for 8 hours before first use.  
 
Configure your phone  
1
2
The batteries are pre-installed in the handset. Pull the battery  
tape off from the battery door before charging.  
When using your phone for the first time, you see a welcome  
message (country dependent).  
3
4
Select your country, then press [OK] to confirm.  
Set the date and time.  
If the time is in 12-hour format, press * key to select [AM] or  
[PM]  
.
 
Charge your phone  
Place the handset on the base station to charge the handset.  
When the handset is placed correctly on the base station, you hear  
a docking sound.  
» The handset starts charging.  
Note Charge the batteries for 8 hours before first use.  
Charge  
8 hours  
Check the battery level  
When the handset is off the base station/charger, the bars  
indicate the battery level (full, medium and low).  
When the handset is on the base station/charger, the bars  
flash until charging completes.  
The empty battery icon flashes and you hear an alert tone.  
The battery is low and needs recharging.  
 
Charge your mobile phone  
1
2
For iPhone users, connect the plug of your USB charging cable  
(not supplied) to the USB socket at the bottom of SE888.  
For mobile phones with micro USB charging, connect the micro  
USB cable plug to the micro USB socket of the mobile phone.  
Telephone  
base station  
 
Bluetooth  
2
Note  
Pair SE888 with your mobile phones  
Make sure the Bluetooth function of the mobile phones  
is activated and in searching status.Then you can do the  
pairing in this way:  
When the Bluetooth device list is full, remove some  
mobile phone names before pairing can start.  
If the name of SE888 exists in your mobile phone, you  
have to remove it from your mobile phone.Then you  
can do the pairing again.  
1
2
3
On the base station, press MENU.  
Select [Bluetooth] [Find Me]  
Place the mobile phone close to the base station, then  
press [OK] to confirm.  
On the mobile phone, select SE888 and connect.  
Enter the PIN code (0000) on the mobile phone if  
necessary.  
>
.
Tip  
For PC pairing and PC phonebook download, install  
the PC software ‘ThinkLink’ saved in the cd rom or at  
4
5
» When SE888 and the mobile phone are paired,  
or  
is displayed on the screen of the handset  
and base station.  
 
Enjoy  
3
Note Make sure that the Line settings are set to  
[Home] for land line or [Mobile 1]/[Mobile 2] for  
Bluetooth line. For information, see Line settings in the  
Phone settings chapter in the user manual.  
Call  
Quick call from land line  
Press  
/
on the handset or  
on the base station  
and dial the phone number.  
Dial before you call  
Tip If you select [Auto] on the handset, the idle line is  
pre-selected for an outgoing call, with [Home] as the  
highest priority. Then [Mobile 1] and [Mobile 2]. If  
you select [Manual], select an icon among these three  
options.  
1
2
Dial the phone number on the handset or base station.  
Press / to select the land line or Bluetooth line (  
) from which you want to make an outgoing call.  
Then, you can either:  
/
/
3
press  
press  
/
or  
on the handset; or  
on the base station and select a line  
or mobile phone to dial out the call.  
 
Answer a call  
Adjust the volume during a call  
When there is an incoming call from the land line, press  
Press  
/
on the handset or  
/
on the base station to  
/
on the handset or  
on the base station.  
change the volume during a call.  
When there is an incoming call from the Bluetooth  
line, press  
station.  
/
on the handset or  
on the base  
Add a contact in the phonebook  
1
2
Press on the handset or base station.  
When there are incoming calls from the land line and  
Bluetooth line at the same time, press  
handset/base station to select a call, then,  
on the handset, press  
on the base station, press  
of the calls.  
Select [Option]  
>
[Add new], then press [OK] to  
/
on the  
confirm.  
3
4
Enter the name then press [OK] to confirm.  
Enter the number, then press [Save] to confirm.  
/
; or  
or  
to pick up one  
End a call  
Press  
on the handset or  
on the base station.  
Place the handset to the base station.  
 
Record an announcement  
1
2
Press [Menu]  
Select  
>
[Announcement], then press [OK] to  
confirm.  
3
Select [Answer & rec.] or [Answer only], then press  
[OK] to confirm.  
4
5
6
Select [Record new], then press [OK] to confirm.  
Start recording close to the microphone after the beep.  
Press [OK] to stop recording.  
» You can listen to the newly recorded  
announcement on the handset.  
 
Listen to messages recorded on the answering machine  
a Switch on/off the answering machine: Press  
b Start/Stop listening to the recorded messages: Press  
c Adjust the volume: Press  
d Delete the current message: Press  
.
.
/
.
.
ab cd  
Note For more information, see theTelephone answering machine  
section in the user manual.  
 
Welcome to Philips  
Register your product at www.philips.com/welcome  
Need help?  
User manual  
Refer to the user manual that came with your new phone.  
Online help  
Reproduction in whole or in part is prohibited  
without the written consent of the copyright owner.  
Trademarks are the property of Koninklijke Philips  
Electronics N.V. or their respective owners.  
© 2011 Koninklijke Philips Electronics N.V.  
All rights reserved.  
0168  
QSG_SE888_EN_V1.3  
WK11285  
 

Pelican Landscape Lighting 9420 User Manual
Philips Cassette Player AW 7250 05S User Manual
Philips Stereo System SWA3302S User Manual
Philips Trimmer NT8110 User Manual
Pioneer Bluetooth Headset BDP 52FD User Manual
Pioneer Car Stereo System S P160 User Manual
Pitco Frialator Fryer L22 355 User Manual
Pixel Magic Systems Home Theater System VPS3800 User Manual
Plantronics Network Card APC 4 User Manual
Polycom Server 14117800 User Manual